问题来了。
发表于 : 周二 12月 08, 2015 10:40 pm
1.硬件886nv3，按照说明方法刷入的uboot。
2，刷入superwrt 没有无线，
3，superwrt界面无法上传TP固件
4，捅菊花，刷886nv5固件，wan口无效。
5，捅菊花，刷v3固件，Bad magic number 494d4730!
6，根据v5开发的，理论上v3硬件相当啊，应该支持的呢，那个错误代码是检测固件不通过吧。是uboot不兼容么？
7，uboot支持刷入编程器固件么?
8,最好uboot help里的命令，来个教程。
U-Boot 1.1.4-g49d3d3a1-dirty (Dec 4 2015 - 12:58:31)
tl-wr886n-v5 - Dragonfly 1.0
DRAM: 16 MB
Flash: 2 MB (c84015)
Using default environment
In: serial
Out: serial
Err: serial
Net: Dragonfly----> S27 PHY *
eth0: 00:03:7f:09:0b:ad
eth1: 00:03:7f:09:0b:ad
eth0, eth1
Setting 0x181162c0 to 0x4d9a2100
U-Boot 1.1.4-g49d3d3a1-dirty (Dec 4 2015 - 12:58:31)
tl-wr886n-v5 - Dragonfly 1.0
DRAM: 16 MB
Flash: 2 MB (c84015)
Using default environment
In: serial
Out: serial
Err: serial
Net: Dragonfly----> S27 PHY *
eth0: 00:03:7f:09:0b:ad
eth1: 00:03:7f:09:0b:ad
eth0, eth1
Setting 0x181162c0 to 0x4d9a2100
enet1 port1 up
dup 1 speed 1000
starting httpd server eth1 192.168.17.1
Alloc 192.168.17.111 to 00:1f:c6:6c:83:09
Request for: /
Request for: /style.css
Data will be downloaded at 0x80060000 in RAM
Upload file size: 1148196 bytes
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
###############
Bad magic number 494d4730!
Request for: /
Request for: /router/get_rand_key.cgi
File not found!
Request for: /router/get_rand_key.cgi
File not found!
Request for: /router/get_rand_key.cgi
File not found!
Request for: /router/get_rand_key.cgi
File not found!
Request for: /router/get_rand_key.cgi
File not found!
Request for: /common/Content.htm
File not found!
Request for: /html/index.asp
File not found!
Request for: /html/index.html
File not found!
Request for: /nat_dmz.asp
File not found!
Request for: /router/get_rand_key.cgi
File not found!
Request for: /router/get_rand_key.cgi
File not found!
Request for: /router/get_rand_key.cgi
File not found!
------------------------------------------------------------------------拔电重启
U-Boot 1.1.4-g49d3d3a1-dirty (Dec 4 2015 - 12:58:31)
tl-wr886n-v5 - Dragonfly 1.0
DRAM: 16 MB
Flash: 2 MB (c84015)
Using default environment
In: serial
Out: serial
Err: serial
Net: Dragonfly----> S27 PHY *
eth0: 00:03:7f:09:0b:ad
eth1: 00:03:7f:09:0b:ad
eth0, eth1
Setting 0x181162c0 to 0x4d9a2100
Net cmd check.
enet0 port4 up
dup 1 speed 100
Hit any key to stop autoboot: 0
## Booting image at 9f028000 ...
Image Name: SuperWrt qca/ar934x/tiny
Created: 2015-12-04 7:13:51 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 881664 Bytes = 861 kB
Load Address: 80060000
Entry Point: 80060000
Verifying Checksum at 0x9f028040 ...OK
Uncompressing Kernel Image ... OK
Starting kernel ...
[ 0.000000] Linux version 3.18.8 (terra@localhost.localdomain) (gcc version 4.8.3 (SuperWrt/Linaro GCC 4.8-2014.04 r44747) ) #2 Fri Dec 4 15:13:48 CST 2015
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[ 0.000000] SoC: Qualcomm Atheros TP9343 rev 0
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 01000000 @ 00000000 (usable)
[ 0.000000] User-defined physical RAM map:
[ 0.000000] memory: 01000000 @ 00000000 (usable)
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x00ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x00ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x00ffffff]
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4064
[ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/sbin/init mtdparts=spi0.0:32k(lite-uboot),96k(rtboot),4k(ART),28k(config),1888k(firmware) mem=16M rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 64 (order: -4, 256 bytes)
[ 0.000000] Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 13168K/16384K available (2049K kernel code, 94K rwdata, 268K rodata, 140K init, 83K bss, 3216K reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:750.000MHz, DDR:400.000MHz, AHB:250.000MHz, Ref:25.000MHz
[ 0.000000] Calibrating delay loop... 374.78 BogoMIPS (lpj=749568)
[ 0.028000] pid_max: default: 4096 minimum: 301
[ 0.032000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.036000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040000] NET: Registered protocol family 16
[ 0.044000] MIPS: machine is SuperWRT
[ 0.464000] Switched to clocksource MIPS
[ 0.468000] NET: Registered protocol family 2
[ 0.472000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.484000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.492000] TCP: reno registered
[ 0.492000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.500000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.504000] NET: Registered protocol family 1
[ 0.508000] futex hash table entries: 16 (order: -5, 192 bytes)
[ 0.520000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.524000] io scheduler noop registered
[ 0.528000] io scheduler deadline registered (default)
[ 0.536000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
奫 0.564000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
[ 0.572000] console [ttyS0] enabled
[ 0.572000] console [ttyS0] enabled
[ 0.580000] bootconsole [early0] disabled
[ 0.580000] bootconsole [early0] disabled
[ 0.588000] m25p80 spi0.0: found gd25q16, expected m25p80
[ 0.596000] m25p80 spi0.0: gd25q16 (2048 Kbytes)
[ 0.600000] 5 cmdlinepart partitions found on MTD device spi0.0
[ 0.604000] Creating 5 MTD partitions on "spi0.0":
[ 0.612000] 0x000000000000-0x000000008000 : "lite-uboot"
[ 0.616000] 0x000000008000-0x000000020000 : "rtboot"
[ 0.624000] 0x000000020000-0x000000021000 : "ART"
[ 0.628000] 0x000000021000-0x000000028000 : "config"
[ 0.632000] 0x000000028000-0x000000200000 : "firmware"
[ 0.640000] Support for built-in firmware splitter will be removed, please use CONFIG_MTD_SPLIT_UIMAGE_FW
[ 0.648000] 0x0000000ff440-0x000000200000 : "rootfs"
[ 0.656000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.668000] mtd: device 5 (rootfs) set to be root filesystem
[ 0.676000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.680000] 0x0000001ed000-0x000000200000 : "rootfs_data"
[ 0.692000] libphy: ag71xx_mdio: probed
[ 1.264000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd042, driver=Generic PHY]
[ 1.272000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 1.848000] ag71xx-mdio.1: Found an AR934X built-in switch
[ 1.888000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[ 1.892000] PPP generic driver version 2.4.2
[ 1.900000] PPP MPPE Compression module registered
[ 1.904000] NET: Registered protocol family 24
[ 1.908000] PPTP driver version 0.8.5
[ 1.912000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0
[ 1.920000] nf_conntrack version 0.5.0 (205 buckets, 820 max)
[ 1.928000] gre: GRE over IPv4 demultiplexor driver
[ 1.932000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.940000] TCP: cubic registered
[ 1.940000] NET: Registered protocol family 17
[ 1.948000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.964000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[ 1.972000] Freeing unused kernel memory: 140K (802bd000 - 802e0000)
init started: BusyBox v1.22.1 (2015-12-04 12:48:28 CST)
starting pid 36, tty '': 'sh /etc/init.d/rcS S start'
mount: mounting usbfs on /proc/bus/usb failed: No such file or directory
mount: mounting devpts on /dev/pts failed: No such file or directory
mount: mounting nodev on /sys/kernel/debug failed: No such file or directory
[ 3.948000] Loading modules backported from Linux version master-2015-10-26-0-g28c26cb
[ 3.956000] Backport generated by backports.git backports-20150903-4-g12cf266
[ 3.984000] cfg80211: World regulatory domain updated:
[ 3.988000] cfg80211: DFS Master region: unset
[ 3.992000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4.004000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.012000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.020000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.028000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 4.036000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 4.048000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 4.056000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.064000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 4.492000] ath: phy0: both bands are disabled
[ 4.496000] ath: phy0: Unable to initialize hardware; initialization status: -22
[ 4.504000] ath9k qca956x_wmac: failed to initialize device
[ 4.512000] ath9k: probe of qca956x_wmac failed with error -22
[ 5.056000] random: svld urandom read with 19 bits of entropy available
killall: hostapd: no process killed
[ 5.548000] device eth1 entered promiscuous mode
[ 5.600000] lan: port 1(eth1) entered forwarding state
[ 5.608000] lan: port 1(eth1) entered forwarding state
killall: udhcpd: no process killed
killall: pppoec: no process killed
killall: udhcpc: no process killed
[ 6.556000] lan: port 1(eth1) entered disabled state
route: SIOCDELRT: No such process
ifconfig: invalid hw-addr up
udhcpc (v1.22.1) started
Setting IP address 0.0.0.0 on eth0
Sending discover...
killall: pptpc: no process killed
Jan 1 00:00:06 crond[209]: crond: crond (busybox 1.22.1) started, log level 8
Please press Enter to activate this console. [ 7.696000] eth1: link up (1000Mbps/Full duplex)
[ 7.700000] lan: port 1(eth1) entered forwarding state
[ 7.704000] lan: port 1(eth1) entered forwarding state
[ 8.264000] eth0: link up (100Mbps/Full duplex)
Sending discover...
Sending select for 192.168.199.118...
Lease of 192.168.199.118 obtained, lease time 43200
Setting IP address 192.168.199.118 on eth0
route: SIOCDELRT: No such process
DHCP router 192.168.199.1
DHCP DNS 192.168.199.1
[ 32.188000] random: nonblocking pool is initialized
[ 88.200000] eth1: link down
[ 88.200000] lan: port 1(eth1) entered disabled state
[ 90.700000] eth1: link up (1000Mbps/Full duplex)
[ 90.704000] lan: port 1(eth1) entered forwarding state
[ 90.708000] lan: port 1(eth1) entered forwarding state
2，刷入superwrt 没有无线，
3，superwrt界面无法上传TP固件
4，捅菊花，刷886nv5固件，wan口无效。
5，捅菊花，刷v3固件，Bad magic number 494d4730!
6，根据v5开发的，理论上v3硬件相当啊，应该支持的呢，那个错误代码是检测固件不通过吧。是uboot不兼容么？
7，uboot支持刷入编程器固件么?
8,最好uboot help里的命令，来个教程。
U-Boot 1.1.4-g49d3d3a1-dirty (Dec 4 2015 - 12:58:31)
tl-wr886n-v5 - Dragonfly 1.0
DRAM: 16 MB
Flash: 2 MB (c84015)
Using default environment
In: serial
Out: serial
Err: serial
Net: Dragonfly----> S27 PHY *
eth0: 00:03:7f:09:0b:ad
eth1: 00:03:7f:09:0b:ad
eth0, eth1
Setting 0x181162c0 to 0x4d9a2100
U-Boot 1.1.4-g49d3d3a1-dirty (Dec 4 2015 - 12:58:31)
tl-wr886n-v5 - Dragonfly 1.0
DRAM: 16 MB
Flash: 2 MB (c84015)
Using default environment
In: serial
Out: serial
Err: serial
Net: Dragonfly----> S27 PHY *
eth0: 00:03:7f:09:0b:ad
eth1: 00:03:7f:09:0b:ad
eth0, eth1
Setting 0x181162c0 to 0x4d9a2100
enet1 port1 up
dup 1 speed 1000
starting httpd server eth1 192.168.17.1
Alloc 192.168.17.111 to 00:1f:c6:6c:83:09
Request for: /
Request for: /style.css
Data will be downloaded at 0x80060000 in RAM
Upload file size: 1148196 bytes
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
#######################################
###############
Bad magic number 494d4730!
Request for: /
Request for: /router/get_rand_key.cgi
File not found!
Request for: /router/get_rand_key.cgi
File not found!
Request for: /router/get_rand_key.cgi
File not found!
Request for: /router/get_rand_key.cgi
File not found!
Request for: /router/get_rand_key.cgi
File not found!
Request for: /common/Content.htm
File not found!
Request for: /html/index.asp
File not found!
Request for: /html/index.html
File not found!
Request for: /nat_dmz.asp
File not found!
Request for: /router/get_rand_key.cgi
File not found!
Request for: /router/get_rand_key.cgi
File not found!
Request for: /router/get_rand_key.cgi
File not found!
------------------------------------------------------------------------拔电重启
U-Boot 1.1.4-g49d3d3a1-dirty (Dec 4 2015 - 12:58:31)
tl-wr886n-v5 - Dragonfly 1.0
DRAM: 16 MB
Flash: 2 MB (c84015)
Using default environment
In: serial
Out: serial
Err: serial
Net: Dragonfly----> S27 PHY *
eth0: 00:03:7f:09:0b:ad
eth1: 00:03:7f:09:0b:ad
eth0, eth1
Setting 0x181162c0 to 0x4d9a2100
Net cmd check.
enet0 port4 up
dup 1 speed 100
Hit any key to stop autoboot: 0
## Booting image at 9f028000 ...
Image Name: SuperWrt qca/ar934x/tiny
Created: 2015-12-04 7:13:51 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 881664 Bytes = 861 kB
Load Address: 80060000
Entry Point: 80060000
Verifying Checksum at 0x9f028040 ...OK
Uncompressing Kernel Image ... OK
Starting kernel ...
[ 0.000000] Linux version 3.18.8 (terra@localhost.localdomain) (gcc version 4.8.3 (SuperWrt/Linaro GCC 4.8-2014.04 r44747) ) #2 Fri Dec 4 15:13:48 CST 2015
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[ 0.000000] SoC: Qualcomm Atheros TP9343 rev 0
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 01000000 @ 00000000 (usable)
[ 0.000000] User-defined physical RAM map:
[ 0.000000] memory: 01000000 @ 00000000 (usable)
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x00ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x00ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x00ffffff]
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4064
[ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/sbin/init mtdparts=spi0.0:32k(lite-uboot),96k(rtboot),4k(ART),28k(config),1888k(firmware) mem=16M rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 64 (order: -4, 256 bytes)
[ 0.000000] Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 13168K/16384K available (2049K kernel code, 94K rwdata, 268K rodata, 140K init, 83K bss, 3216K reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:750.000MHz, DDR:400.000MHz, AHB:250.000MHz, Ref:25.000MHz
[ 0.000000] Calibrating delay loop... 374.78 BogoMIPS (lpj=749568)
[ 0.028000] pid_max: default: 4096 minimum: 301
[ 0.032000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.036000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040000] NET: Registered protocol family 16
[ 0.044000] MIPS: machine is SuperWRT
[ 0.464000] Switched to clocksource MIPS
[ 0.468000] NET: Registered protocol family 2
[ 0.472000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.484000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.492000] TCP: reno registered
[ 0.492000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.500000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.504000] NET: Registered protocol family 1
[ 0.508000] futex hash table entries: 16 (order: -5, 192 bytes)
[ 0.520000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.524000] io scheduler noop registered
[ 0.528000] io scheduler deadline registered (default)
[ 0.536000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
奫 0.564000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
[ 0.572000] console [ttyS0] enabled
[ 0.572000] console [ttyS0] enabled
[ 0.580000] bootconsole [early0] disabled
[ 0.580000] bootconsole [early0] disabled
[ 0.588000] m25p80 spi0.0: found gd25q16, expected m25p80
[ 0.596000] m25p80 spi0.0: gd25q16 (2048 Kbytes)
[ 0.600000] 5 cmdlinepart partitions found on MTD device spi0.0
[ 0.604000] Creating 5 MTD partitions on "spi0.0":
[ 0.612000] 0x000000000000-0x000000008000 : "lite-uboot"
[ 0.616000] 0x000000008000-0x000000020000 : "rtboot"
[ 0.624000] 0x000000020000-0x000000021000 : "ART"
[ 0.628000] 0x000000021000-0x000000028000 : "config"
[ 0.632000] 0x000000028000-0x000000200000 : "firmware"
[ 0.640000] Support for built-in firmware splitter will be removed, please use CONFIG_MTD_SPLIT_UIMAGE_FW
[ 0.648000] 0x0000000ff440-0x000000200000 : "rootfs"
[ 0.656000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.668000] mtd: device 5 (rootfs) set to be root filesystem
[ 0.676000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.680000] 0x0000001ed000-0x000000200000 : "rootfs_data"
[ 0.692000] libphy: ag71xx_mdio: probed
[ 1.264000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd042, driver=Generic PHY]
[ 1.272000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 1.848000] ag71xx-mdio.1: Found an AR934X built-in switch
[ 1.888000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[ 1.892000] PPP generic driver version 2.4.2
[ 1.900000] PPP MPPE Compression module registered
[ 1.904000] NET: Registered protocol family 24
[ 1.908000] PPTP driver version 0.8.5
[ 1.912000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0
[ 1.920000] nf_conntrack version 0.5.0 (205 buckets, 820 max)
[ 1.928000] gre: GRE over IPv4 demultiplexor driver
[ 1.932000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.940000] TCP: cubic registered
[ 1.940000] NET: Registered protocol family 17
[ 1.948000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.964000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[ 1.972000] Freeing unused kernel memory: 140K (802bd000 - 802e0000)
init started: BusyBox v1.22.1 (2015-12-04 12:48:28 CST)
starting pid 36, tty '': 'sh /etc/init.d/rcS S start'
mount: mounting usbfs on /proc/bus/usb failed: No such file or directory
mount: mounting devpts on /dev/pts failed: No such file or directory
mount: mounting nodev on /sys/kernel/debug failed: No such file or directory
[ 3.948000] Loading modules backported from Linux version master-2015-10-26-0-g28c26cb
[ 3.956000] Backport generated by backports.git backports-20150903-4-g12cf266
[ 3.984000] cfg80211: World regulatory domain updated:
[ 3.988000] cfg80211: DFS Master region: unset
[ 3.992000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4.004000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.012000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.020000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.028000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 4.036000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 4.048000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 4.056000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.064000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 4.492000] ath: phy0: both bands are disabled
[ 4.496000] ath: phy0: Unable to initialize hardware; initialization status: -22
[ 4.504000] ath9k qca956x_wmac: failed to initialize device
[ 4.512000] ath9k: probe of qca956x_wmac failed with error -22
[ 5.056000] random: svld urandom read with 19 bits of entropy available
killall: hostapd: no process killed
[ 5.548000] device eth1 entered promiscuous mode
[ 5.600000] lan: port 1(eth1) entered forwarding state
[ 5.608000] lan: port 1(eth1) entered forwarding state
killall: udhcpd: no process killed
killall: pppoec: no process killed
killall: udhcpc: no process killed
[ 6.556000] lan: port 1(eth1) entered disabled state
route: SIOCDELRT: No such process
ifconfig: invalid hw-addr up
udhcpc (v1.22.1) started
Setting IP address 0.0.0.0 on eth0
Sending discover...
killall: pptpc: no process killed
Jan 1 00:00:06 crond[209]: crond: crond (busybox 1.22.1) started, log level 8
Please press Enter to activate this console. [ 7.696000] eth1: link up (1000Mbps/Full duplex)
[ 7.700000] lan: port 1(eth1) entered forwarding state
[ 7.704000] lan: port 1(eth1) entered forwarding state
[ 8.264000] eth0: link up (100Mbps/Full duplex)
Sending discover...
Sending select for 192.168.199.118...
Lease of 192.168.199.118 obtained, lease time 43200
Setting IP address 192.168.199.118 on eth0
route: SIOCDELRT: No such process
DHCP router 192.168.199.1
DHCP DNS 192.168.199.1
[ 32.188000] random: nonblocking pool is initialized
[ 88.200000] eth1: link down
[ 88.200000] lan: port 1(eth1) entered disabled state
[ 90.700000] eth1: link up (1000Mbps/Full duplex)
[ 90.704000] lan: port 1(eth1) entered forwarding state
[ 90.708000] lan: port 1(eth1) entered forwarding state