SuperWRT社区

Hi,

I have the following device :

Version: WitUnit Boot 1.3.7-g54519cca-dirty (Dec 4 2017 - 16:59:14)
CPU: QCA953x - Honey Bee 2.0
Flash: 8 MB (Flash ID: ef4017 / Erase Size: 4k)
DRAM: 64 MB
Frequency: CPU 650MHz / RAM 597MHz / AHB 216MHz
SBI Info: CPE2G-9531/terra@superwrt.com/2017-12-21
Device UID: 6000cdb938e66d552c303249b03ee06b
WLAN0 info: cal:0xff1000, mac:0xff1002 (84:40:00:00:17:0c)
MAC: 84:40:00:00:17:0c
Firmware: FW/link/1.5.28/qca/qca9k/2a7ab355b4
Custom(/License):
LIC_wlink/zl_master_9531 UID:6000cdb938e66d552c303249b03ee06b
Partions:
0x00000000-0x0001c000[0x0001c000] uboot
0x0001c000-0x00020000[0x00004000] SBI
0x00020000-0x007a0000[0x00780000] firmware
0x007a0000-0x007b0000[0x00010000] elog
0x007b0000-0x007c0000[0x00010000] config
0x007c0000-0x007d0000[0x00010000] config2
0x007d0000-0x007e0000[0x00010000] custom
0x007e0000-0x007f0000[0x00010000] DTB
0x007f0000-0x00800000[0x00010000] CAL

I need to install OpenWRt on it

How to proceed ?

Thank you

I upgraded with latest boot & superwrt :

Version: SuperWRT Boot 1.3.10-g6a239a72-dirty (Sep 4 2018 - 18:15:21)
CPU: QCA953x - Honey Bee 2.0
Flash: 8 MB (Flash ID: ef4017 / Erase Size: 4k)
DRAM: 64 MB
Frequency: CPU 650MHz / RAM 597MHz / AHB 216MHz
SBI Info: CPE2G-9531/terra@superwrt.com/2017-12-21
Device UID: 6000cdb938e66d552c303249b03ee06b
WLAN0 info: cal:0xff1000, mac:0xff1002 (84:40:00:00:17:0c)
MAC: 84:40:00:00:17:0c
Firmware: FW/std/0.7.7/qca/qca9k/b42071d9c9
Custom(/License):
LIC_wlink/zl_master_9531 UID:6000cdb938e66d552c303249b03ee06b
Partions:
0x00000000-0x0001c000[0x0001c000] uboot
0x0001c000-0x00020000[0x00004000] SBI
0x00020000-0x007a0000[0x00780000] firmware
0x007a0000-0x007b0000[0x00010000] elog
0x007b0000-0x007c0000[0x00010000] config
0x007c0000-0x007d0000[0x00010000] config2
0x007d0000-0x007e0000[0x00010000] custom
0x007e0000-0x007f0000[0x00010000] DTB
0x007f0000-0x00800000[0x00010000] CAL


Still no ssh or telnet access.

How to erase all this and install OpenWrt ?

THank you

这是外国友人吗？
Is this a foreign friend?