定制了一个9558+8035的uboot结果反复重启,请问可能是啥原因?

cloudq
帖子: 46
注册: 周五 3月 18, 2016 8:43 am

定制了一个9558+8035的uboot结果反复重启,请问可能是啥原因?

帖子cloudq » 周四 11月 30, 2017 5:20 pm

定制了一个9558+8035的uboot结果反复重启,请问可能是啥原因?

SuperWRT Boot 1.3.6-g9427049b-dirty (Oct 20 2017 - 10:49:10)

QCA955x - Scorpion 1.0

DRAM: 128 MB
Flash: 16 MB (c22018)
Using default environment

Frequency: CPU 720MHz / RAM 600MHz / AHB 240MHz
Bootstrap Config: 0x00031e5c
SuperWRT Board Info(0x9f01c000):
9558_8035_4/mcpcloud@126.com/2017-11-30
WLAN0 info: cal:0x9fff1000, mac:0x9fff0000
WLAN1 info: cal:0x9fff5000, mac:0x9fff0006
Device UID: none
GPIO: reset(-1/L), system(-1/L)
In: serial
Out: serial
Err: serial
Net: (ac:34:cb:b0:fb:dd) 8035 eth0
Set 0x18116290 = 0x4890214f
Hit 'c' or 'Ctrl+c' to stop autoboot: 1
Net Command waiting: 2
Try eth1 first.
eth0 link down
Retry start!


SuperWRT Boot 1.3.6-g9427049b-dirty (Oct 20 2017 - 10:49:10)

QCA955x - Scorpion 1.0

DRAM: 128 MB
Flash: 16 MB (c22018)
Using default environment

Frequency: CPU 720MHz / RAM 600MHz / AHB 240MHz
Bootstrap Config: 0x00031e5c
SuperWRT Board Info(0x9f01c000):
9558_8035_4/mcpcloud@126.com/2017-11-30
WLAN0 info: cal:0x9fff1000, mac:0x9fff0000
WLAN1 info: cal:0x9fff5000, mac:0x9fff0006
Device UID: none
GPIO: reset(-1/L), system(-1/L)
In: serial
Out: serial
Err: serial
Net: (ac:34:cb:b0:fb:dd) 8035 eth0
Set 0x18116290 = 0x4890214f
Hit 'c' or 'Ctrl+c' to stop autoboot: 1
Net Command waiting: 2
Try eth1 first.
eth0 link down
Retry start!


SuperWRT Boot 1.3.6-g9427049b-dirty (Oct 20 2017 - 10:49:10)

QCA955x - Scorpion 1.0

DRAM: 128 MB
Flash: 16 MB (c22018)
Using default environment

Frequency: CPU 720MHz / RAM 600MHz / AHB 240MHz
Bootstrap Config: 0x00031e5c
SuperWRT Board Info(0x9f01c000):
9558_8035_4/mcpcloud@126.com/2017-11-30
WLAN0 info: cal:0x9fff1000, mac:0x9fff0000
WLAN1 info: cal:0x9fff5000, mac:0x9fff0006
Device UID: none
GPIO: reset(-1/L), system(-1/L)
In: serial
Out: serial
Err: serial
Net: (ac:34:cb:b0:fb:dd) 8035 eth0
Set 0x18116290 = 0x4890214f
Hit 'c' or 'Ctrl+c' to stop autoboot: 1
Net Command waiting: 2
Try eth1 first.
eth0 link down
Retry start!


SuperWRT Boot 1.3.6-g9427049b-dirty (Oct 20 2017 - 10:49:10)

QCA955x - Scorpion 1.0

DRAM: 128 MB
Flash: 16 MB (c22018)
Using default environment

Frequency: CPU 720MHz / RAM 600MHz / AHB 240MHz
Bootstrap Config: 0x00031e5c
SuperWRT Board Info(0x9f01c000):
9558_8035_4/mcpcloud@126.com/2017-11-30
WLAN0 info: cal:0x9fff1000, mac:0x9fff0000
WLAN1 info: cal:0x9fff5000, mac:0x9fff0006
Device UID: none
GPIO: reset(-1/L), system(-1/L)
In: serial
Out: serial
Err: serial
Net: (ac:34:cb:b0:fb:dd)

Jackie
帖子: 1
注册: 周三 5月 15, 2019 5:09 pm

Re: 定制了一个9558+8035的uboot结果反复重启,请问可能是啥原因?

帖子Jackie » 周五 5月 17, 2019 2:51 pm

gpio重新配置一下,你这个没有配置好


回到 “bootloader”